Showing 73–90 of 348 resultsSorted by price: low to high
Replacement O-Ring Seals Suit 23mm OD Quartz Thimbles & Sleeves (NC7-90 THIMBLE ) Replacement o/ring (NCOR6PAC)
In stock
$21.00Replacement O-Ring Seals Suit 23mm OD Quartz Thimbles & Sleeves 6 PACK ( NCOR6PAC)
O-Ring Compliant to (NCH7-90-THIMBLE)
Suitable for 23mm OD Thimbles
Suits the following (NCH7-90-THIMBLE) ( SYSTEM NCWHWPTUV)
O-rings are specific to manufactures systems. Systems can look the same but have different specifications of diameter or thickness.
o- ring replacement 24 mths
A faulty o- ring may cause water to enter uv protection lamp resulting in water filter failure
REEFE Rainpro WALL BRACKET RM1500 RM1600 2 FLOAT-LESS RAINS TO MAINS Wall Mounting Bracket (Small Cast Type) (ncrwb)
In stock
$25.00REEFE Rainpro WALL BRACKET RM1500 RM1600 2 FLOAT-LESS RAINS TO MAINS Wall Mounting Bracket (Small Cast Type) (ncrwb)
Wall Mounting Bracket (Small Cast Type) for RM1600-2 Floatless Rain to Mains Valve
| Wall Mounting Bracket (Small Cast Type) |
PLASTIC Y STRAINER WHOLE HOUSE PRESSURE PUMP (Y-Strainer Filter with Stainless Steel Filter Screen) (ncrys) (Copy)
In stock
$25.00PLASTIC Y STRAINER WHOLE HOUSE PRESSURE PUMP (Y-Strainer Filter with Stainless Steel Filter Screen)
easy to install and economical, the strainer pre-filters will protect your pump from solids. These reusable particle filters are designed to be installed between the rainwater tank and the Pressure Pump. This protects the pump from damaging grit and poly-tank shavings, extending the life of the pump and helping to prevent premature pump failure.
Protects pump from damaging grit & poly tank shavings
Clear housing – easy visibility of solids
Extends the life of the pump
Washable, reusable filter cartridge
Easy open – no spanner required
Air bleed port on prefilter
Certified to AS/NZS4020 for use with potable waterr
| CODE | 13120 | MODEL |
Y-Strainer |
| DESCRIPTION |
Plastic Y-Strainer with Stainless Steel Filter Screen |
||
| MAX FLOW | 150 L/min | MAX PRESSURE (kPa/bar) | 900/9 |
| INLET / OUTLET | 25mm | MICRON | 1000 |
whole house water filter housing Spanner Suit Most 10″ x 4.5″ and 20” x 4.5” White & heavy Duty Filter Housing (ncpfs1045)
In stock
$30.00whole house water filter housing Spanner Suit Most 10” x 4.5” and 20” x 4.5” filter housings
10″ x 4.5″ 5 Micron Polyspun Sediment Gradient Water Filter Cartridge
In stock
$35.00Price: 35.00 EACH 6 PAC 31.30 EACH 189.00
10″ X 4.5″ poly spun dirt and sediment replacement filters (ncps1045) suite most 10” x 4.5” filter housings
In stock
$36.00QUICK OVER VIEW
- High Performance pre sediment filter
- High Performance Filtration (HPF) spun polypropylene sediment cartridge
- Gradient depth design with multi-layer filtration (20micron 10 micron 5 micron )
- Effectively removes fine dirt, rust, sand, and suspended particles
- High dirt-holding capacity with low pressure drop performance
- HPF Polypropylene Spun Sediment Filter is a high-efficiency cartridge designed for fine sediment reduction in residential, commercial, and industrial water systems. Made from 100% food-grade polypropylene, this cartridge features a gradient depth construction that progressively captures particles throughout the filter body.
10″ X 4.5″ Pleated dirt and sediment replacement filters (ncp1045) suite most 10” x 4.5” filter housings
In stock
$36.00QUICK OVER VIEW
10″ X 4.5″ Pleated dirt and sediment replacement filters (ncp1045) suite most 10” x 4.5” filter housings
Pleated Washable Sediment Filter offers high-performance filtration with the following benefits:
-
- 5 Micron Filtration: Captures fine sediment, rust, and dirt down to 5 micron for improved water clarity.
- 10″ x 4.5″ Size: Compatible with most 10” x 4.5” housings, providing high flow rates and low pressure drop.
- WaterMark Certified: Independently certified for compliance with Australian standards for water filtration components.
- NSF/ANSI 42 Compliant: Meets international standards for material safety and structural integrity.
- Washable & Reusable: Designed for heavy sediment loading; can be washed and reused, reducing replacement frequency and maintenance costs.
- High Dirt-Holding Capacity: Pleated design offers extended filter life and greater sediment capture.
- High Flow/Low Pressure Drop: Engineered to maintain strong water pressure while effectively filtering particulates
10″ X 4.5″ String wound dirt and sediment replacement filters (ncsw1045) suite most 10” x 4.5 ” filter housings
In stock
$37.00QUICK OVER VIEW ncsw1045
- 10″ X 4.5″ String wound dirt and sediment replacement filters (ncsw1045) suite most 10” x 4.5 ” filter housings
- High Capacity – String Wound Design
- Standard Size 10″ x 4.5″ Filters
- High Flow 5 Micron Rating
- High Dirt Holding Capacity
- String Wound filters offer a cost effective solution for sediment filtration, String wound filters are wound in a precise pattern around an inner core providing a greater surface area. Thus resulting in a higher dirt holding capacity than regular Polyspun filters. String wound filters also offer greater temperature ranges up to 90°CSize: 10″ x 4.5″
Type: String Wound
Rating: 5 Micron
QTY: 1x Filter - Up to 90°C Temperature Rating
10” X 2.5” 0.5 carbon block lead & heavy metales reduction replacmnet filter
In stock
$39.00QUICK OVER VIEW
- Effectively Reduces Chlorine, Tastes & Odours
- Lead & Heavy Metal Reduction Composite Carbon
- For Tank, Bore, or Mains Water Filtration
- 0.5 Micron Nominal Micron Rating
- Over 95% Reduction of VOC’s as tested by WQA
- Compliant to NSF/ANSI 42
10” X 2.5” Low pressure drop carbon block replacmnet filter = low restriction
In stock
$41.00QUICK OVER VIEW
- Made from 100% Coconut Carbon
- High Iodine 1200 for Increased Chemical Reduction
- Effectively Reduces Chlorine, Tastes & Odours
- Micron Rating 20M
- High Flow – Low Pressure Drop
- Over 95% Reduction of VOC’s
- The coarser micron rating of 20uM allows the filter cartridge to process a higher volume of water with as little resistance as possible. The success of this cartridge comes by way of the special combination of materials and high iodine number to provide chemical absorption you would expect from a standard CTO cartridge, while at the same time having almost 30% less media creating a thinner block wall, allowing water to flow at a higher rate with little resistance.
- Compliant to NSF/ANSI 42
10” X 2.5” Pleated dirt and sediment replacment filters
In stock
$42.00Pleated washable 10 inch housing used in under sink counter top and inline housings cartridges are described as a ‘surface filter’ which means that once the outside surface of the fabric is soiled it needs to be washed. Can be washed and re-used up to 3-4 times before replacement excellent pre-filter for removing large solids and organic matter in dam, tank and bore water. The cartridge has a large surface area to maximise its efficiency, resulting in fewer change outs and is ideal for low pressure situations Suitable for domestic, tank water, irrigation, light industrial applications.
10” x 2.5” 0.5 micron carbon block premium chlorine , taste, odour, replacement filter (nccb1025)
In stock
$44.00QUICK OVER VIEW
nccb1025 10” x 2.5” 0.5 micron carbon block premium chlorine , taste, odour, replacement filter
- Made from 100% Coconut Carbon
- High Iodine 1200 for Increased Chemical Reduction
- Effectively Reduces Chlorine, Tastes & Odours
- Micron Rating 0.5
- Over 95% Reduction of VOC’s
- Pure Carbon Blocks Lead & Heavy Metal Reduction, Chloramine Reduction & Chlorine Taste & Odour reduction. This also includes meeting standards of purity & safety of the materials used.
- Compliant to NSF/ANSI 42
10” X 2.5” 0.5 Micron premium washable ceramic carbon replacment filter
Out of stock
$45.00QUICK OVER VIEW
10″ x 2.5″ Replacment
Ceramic Carbon Cartridge
0.5 Micron Nominal
Flow Rate: 1-3L/Min
20” X 4.5″ 5 Micron poly spun dirt and sediment replacement filters (ncps2045)
In stock
$53.00Features
- Premium 20″ x 4.5″ spun polypropylene sediment filter
- 5 micron nominal filtration rating
- Gradient depth construction for superior particle retention
- Manufactured from 100% food-grade polypropylene
- High dirt-holding capacity for longer cartridge life
- Low pressure drop for consistent flow performance
- Removes sediment, sand, silt, rust, algae, and suspended solids
- Protects carbon filters, UV systems, membranes, and appliances
- Suitable for mains water, rainwater, bore water, and rural water supplies
- Fits most standard 20″ x 4.5″ Big Blue filter housings