Showing 37–54 of 308 results
20” X 4.5″ 5 Micron poly spun dirt and sediment replacement filters
In stock
QUICK OVER VIEW
- High Performance pre sediment filter
- High Performance Filtration (HPF) spun polypropylene sediment cartridge
- Gradient depth design with multi-layer filtration (20micron 10 micron 5 micron )
- Effectively removes fine dirt, rust, sand, and suspended particles
- High dirt-holding capacity with low pressure drop performance
- HPF Polypropylene Spun Sediment Filter is a high-efficiency cartridge designed for fine sediment reduction in residential, commercial, and industrial water systems. Made from 100% food-grade polypropylene, this cartridge features a gradient depth construction that progressively captures particles throughout the filter body.
Larger particles are trapped in the outer layers, while finer contaminants are retained closer to the dense inner core. With a final filtration layer of 5 micron, this cartridge delivers superior clarity by removing very fine sediment, rust, and suspended solids. The design maximises dirt-holding capacity while maintaining low pressure drop, ensuring both long service life and consistent flow performance.
Ideal for use with both mains and rainwater supplies, the HPF polypropylene spun filter is a cost-effective solution for protecting downstream carbon filters, membranes, and water-using equipment from premature fouling. Designed to fit standard 20″ x 4.5″ housings, it offers reliable performance across a wide range of sediment reduction applications.
20” X 4.5 ” 0.5 chloramine reduction coconut carbon block replacmnet filters , chlorine , taste , odour , carbon block
In stock
$155.00QUICK OVER VIEW
- Made from 100% Coconut Carbon – Catalytic Highly Reactive
- High Iodine 1200 for Increased Chemical Reduction
- Effectively Reduces Chlorine, Tastes & Odours
- Effectively Neutralises Chloramine & Absorbs VOC’s and DBP’s in Mains Water
- Chloramines and Chlorine reduction coconut carbon block water filter. The outer screen will reduce dirt sediment and algae. Under the screen is a 0.5 sub micron coconut carbon block filter The filters will fit most standard 20″x 4.5” filter housings and can be used as a single stage filter if you have a clean water supply or use as a second stage filter in a twin filter system.
0.5 micron chloramine reduction coconut carbon block replacmnet filters
20” X 4.5 ”5M Cocconut carbon block filter , chlorine , taste , odour , carbon block
In stock
Quick Overview
- Made from 100% Coconut Carbon
- High Iodine 1200 for Increased Chemical Reduction
- Effectively Reduces Chlorine, Tastes & Odours
- 5 Micron Rating
- Over 95% Reduction of VOC’s
- Compliant to NSF/ANSI 42
20” X 4.5” 0.5 Silver impregnated carbon block ( Bacteriostatic) replacment filter
In stock
$145.00QUICK OVER VIEW
2045S0.5-Silver Impregnated 0.5 Micron 10″ x 4.5″ Carbon Block Filter. Suits 10″ X 4.5” housings great for (TANK WATER)
- great for rainwater / tank water
- Made from 100% Silver Impregnated Coconut Carbon
- Bacteriostatic which makes it ideal for tank water
- Very Effective at Reducing Chlorine, Bad Tastes & Odours
- Rated at 0.5Micron
- Over 95% Reduction of VOC’s Silver impregnation helps reduce( Bacteriostatic) bacteria growth in the filter.
20” X 4.5” 0.5 Surface modified carbon block /high absortion and tannin redusction
In stock
$135.00Quick Overview
- Made from 100% Coconut Carbon – Catalytic Highly Reactive
- High Iodine 1200 for Increased Chemical Reduction
- Effectively Reduces Chlorine, Tastes & Odours
- Highest Contaminant Reduction Cartridge from Pure
- Designed for Colour Absorption & Reduction of Organics
- Available in 20” x 4.5” only, for Maximum Contact Time
- 0.5 Micron Nominal Micron Rating
- Over 95% Reduction of VOC’s as tested by WQA
- Compliant to NSF/ANSI 42
20” X 45” 0.5 carbon block lead & heavy metales reduction replacmnet filter
In stock
$149.00QUICK OVER VIEW
- Effectively Reduces Chlorine, Tastes & Odours
- Lead & Heavy Metal Reduction Composite Carbon
- For Tank, Bore, or Mains Water Filtration
- 0.5 Micron Nominal Micron Rating
- Over 95% Reduction of VOC’s as tested by WQA
- Compliant to NSF/ANSI 42
20″ X 4.5″ 5 Micron Pleated dirt and sediment replacement filters
In stock
QUICK OVER VIEW
he PL4510-05 Pleated Washable Sediment Filter offers high-performance filtration with the following benefits:
-
- 5 Micron Filtration: Captures fine sediment, rust, and dirt down to 5 micron for improved water clarity.
- 10″ x 4.5″ Size: Compatible with most 10” x 4.5” housings, providing high flow rates and low pressure drop.
- WaterMark Certified: Independently certified for compliance with Australian standards for water filtration components.
- NSF/ANSI 42 Compliant: Meets international standards for material safety and structural integrity.
- Washable & Reusable: Designed for heavy sediment loading; can be washed and reused, reducing replacement frequency and maintenance costs.
- High Dirt-Holding Capacity: Pleated design offers extended filter life and greater sediment capture.
- High Flow/Low Pressure Drop: Engineered to maintain strong water pressure while effectively filtering particulates
5,000L Tall Round Poly Tank
In stock
Original price was: $1,568.00.$1,325.00Current price is: $1,325.00.
Beige
Birch Grey
Black
+10
Heritage Green
Heritage Red
Merino
Mist Green
Monument
River Gum
Slate Grey
Smooth Cream
Storm Edge Blue
Wheat
BUY 2 OR MORE TANKS FOR $1100 INC GST PER TANK AND SAVE $$$. 1 TANK IS $1325.00 INC GST.
- Quality Fittings, including 25mm brass BSP outlet, inlet strainer with 0.9mm stainless steel mesh, and 90mm overflow device.
- Choice of 25 different colors.
- Delivery to site within NSW, Queensland, and Northern NSW.
- Full 10-Year Warranty
The original price was: $1,568.00. Current price is: $1,325.00.*
*Price includes GST. Order must be placed by the End of October 2024.
*Price includes GST. Order must be placed by the End of October 2024.
5,000L Tall Round Poly Tank
In stock
Original price was: $1,568.00.$1,325.00Current price is: $1,325.00.BUY 2 OR MORE TANKS FOR $ 950.00 ea INC GST PER TANK AND SAVE $$$. 1 TANK IS $ 999.00 INC GST.
- Quality Fittings, including 25mm brass BSP outlet, inlet strainer with 0.9mm stainless steel mesh, and 90mm overflow device.
- Choice of 25 different colors.
- Delivery to site within NSW, Queensland, and Northern NSW.
- Full 10-Year Warranty
The original price was: $1,568.00. Current price is: $ 999.00*
*Price includes GST. Order must be placed by the End of November 2024.
*Price includes GST. Order must be placed by the End of November 2024.
