Showing 181–198 of 348 resultsSorted by price: high to low
BIANCO BIA-INOX45 SURFACE MOUNTED HOUSE PRESSURE PUMP WITH AUTO CONTROLLER 58LPM
In stock
$410.00Bianco INOX45S2NXT Domestic HOUSEÂ Pressure Pump 58LPMÂ
The pump is a self-priming surface mounted pressure system pump supplied with plug and play leads (IEC type). The self-priming ability provides excellent suction capacity of up to 9m. Used especially for supplying water to domestic installations.
The pump is characterised by:
- Automatic electronic pump control fitted and wired with plug and play leads so a licensed electrician is not required during installation.
- Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss.
- Run dry protection to prevent pump damage
- Automatic electronic control has in-built check valve to prevent water backflow through the pump.
- 2.2bar pump cut in for greater versatility.
- Corrosion resistant pump body, diffuser and impeller to ensure pump durability
- High quality mechanical shaft seal and high quality bearings
- 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
| Brand | Bianco NXT |
|---|---|
| Suitable For | Clean Water |
| Float | No |
| HP | 0.6 Hp |
| Kilo Watts | 0.45 kW |
| Max Flow (L/min) | 58 L/min |
| Max Head (m) | 40 m |
| Powered | Electric |
| Warranty (months) | 24 months |
| Volts | 240 V |
| Pack Weight (KG) | 8.50 |
BIANCO BIA-INOX60 SURFACE MOUNTED HOUSE PRESSURE PUMP WITH AUTO CONTROLLER 62LPM
In stock
$410.00Bianco INOX60S2NXT Domestic HOUSE Pressure Pump 62LPM
The pump is a self-priming surface mounted pressure system pump supplied with plug and play leads (IEC type). The self-priming ability provides excellent suction capacity of up to 9m. Used especially for supplying water to domestic installations.
The pump is characterised by:
- Automatic electronic pump control fitted and wired with plug and play leads so a licensed electrician is not required during installation.
- Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss.
- Run dry protection to prevent pump damage.
- Automatic electronic control has in-built check valve to prevent water backflow through the pump.
- 2.2bar pump cut in for greater versatility.
- Corrosion resistant pump body, diffuser and impeller to ensure pump durability.
- High quality mechanical shaft seal and high quality bearings.
- 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
| Brand | Bianco NXT |
|---|---|
| Suitable For | Clean Water |
| Float | No |
| HP | 0.8 Hp |
| Kilo Watts | 0.6 kW |
| Max Flow (L/min) | 62 L/min |
| Max Head (m) | 43 m |
| Powered | Electric |
| Warranty (months) | 24 months |
| Volts | 240 V |
| Pack Weight (KG) | 11.00 |
NCRM1600 rain to mains /v 20mm wmk RAIN PRO RM1600/2 FLOATLESS RAIN TO MAINS CHANGOVER VALVE
In stock
$410.00Product Code: NCRM1600
REEFE. RAIN PRO RM1600-2 FLOATLESS RAIN TO MAINS CGANGOVER VALVE
Model Number: RM1600-2
Max flow: 100L/MIN
fire kit 65mm Storz x 50mm BSP FI Adaptor + Cap
In stock
$385.00eatures:
- 65mm Storz quick-connect coupling
- 50mm BSP Female threaded connection
- Protective cap included
- Heavy-duty, corrosion-resistant construction
- Suitable for firefighting water tanks and bushfire protection systems
- Fast and secure emergency water access
- Ideal for rural, agricultural, commercial, and residential properties
fire kit 65mm Stortz x 50mm BSP FI Adaptor + Cap
In stock
$385.00Storz Fitting
Stay Prepared With a Storz Fire Tank
In areas where bushfires are all too frequent, a Storz fire tank tanks are more important than ever. These water tanks are steel water tanks and are intended for fire control. With the recently devastating fires in late 2020, more and more local councils are requiring semi rural homes to instal Fire tanks. In short, these are steel water tanks with a special fitting to fit the local fire fighters hose.
What is a Storz fitting?
A storz fitting is simply a fitting that is installed on your steel water tank that is fire fighting compliant. This fitting allows the fire fighters hose to attach to your water tank for assessible water supply to help fight the fire on your property. It is also important to note that these fittings can not be added after market, it must be installed during manufacture to ensure product warranty.
The standard NSW storz kit comes with 50mm outlet, 50mm ball valve, 65mm Storz adapter and 65mm dust cap.
Often customers will combine the Storz fire requirements and their own domestic requirements and purchase a steel tank that is larger. Simply, a domestic fitting would be inserted at a particular level so the water below the domestic fitting is quarantined for fire usage and the water above can be used for domestic purposes like watering the garden or for toilets and laundry.
Accordingly, if you are in the building stage, please ensure you read your plans carefully to see if a Storz fire tank has been called up. As these tanks are made to customer order, there is a wait time of approximately 4 to 5 weeks. Accordingly, its important not to leave it to the last minute to consider what tank is required. Otherwise your certificate of occupancy will almost certainly not be received.
The 65mm x 50mm Stortz BSP FI Adaptor + Cap is firefighting tank fitting is designed to provide quick and efficient connection between a water storage tank and the firefighting unit or hoses. This Stortz fitting is used in NSW and QLD. Tanks that are designated fire storages must have a Stortz fitting fitted and ready for use.
During a fire event when time is short and ease of operation is important than the Stortz fitting is essential.
It is also good practice to have a Stortz fitting added to non-designated tanks as quick water is always beneficial.
65mm Storz x 50mm BSP Female Firefighting Adaptor with Cap
In stock
$385.00Features:
- 65mm Storz quick-connect coupling
- 50mm BSP Female threaded connection
- Protective cap included
- Heavy-duty, corrosion-resistant construction
- Suitable for firefighting water tanks and bushfire protection systems
- Fast and secure emergency water access
- Ideal for rural, agricultural, commercial, and residential properties
UV-Guard CWP55 Electronic ballast suit upto 80w UV Lamp system (ncuvgballast ) 200mml x80mmh x 75mmd
In stock
$350.00UV-Guard CWP55 Electronic ballast suit upto 80w UV Lamp system (ncuvgballast ) 200mml x80mmh x 75mmd
Features
Electronic ballast for 80w UV lamp with lamp operation
UV-lamp fail and neons indicator fail buzzer
356 countdown digital auto set indicator
volt free contact’s for remote lamp fail indicator
200mm long  80mm height  75mm depth
REEFE VORTEX SUMP PUMP 155L MIN 7 M HD WITH PUMP FLOAT SWITCH (ncrvortex155fs)
In stock
$350.00REEFE VORTEX SUMP PUMP 155L MIN 7 M HD WITH PUMP FLOAT SWITCH (ncrvortex155fs)
• Solids handling 15mm
• High performance
• Thermal overload protection
• 10m power cable, H05RN-F
• Includes 3 different hose tails – 25/32/40mm
• Includes lifting rope
• Max liquid temperature 40°C
• Max ambient temperature 40°C
• Electrical Safety Approval to AS/NZS 60335.2.41
This REEFE® submersible vortex pump has been specifically designed for sump pump out applications. Solid cast-iron and stainless steel construction for robust and reliable pumps on which you can depend. Capable of handling soft solids up to 15mm.
Dirty water transfer
Grey water
Household wastewater
Sump draining
Pool emptying
Wastewater systems
Stainless steel motor housing and shaft
Technopolymer vortex impeller with special sand-flinging design to reduce clogging and wear
Dual silicon carbide/ceramic mechanical seal with oil chamber
MAC 3 type float switch, depth adjustable
Ingress Protection IP68
Insulation Class B
Cast iron base and outlet
| CODE | 8409 | MODEL | RVS155 |
| AMPS | 1.5 | P2 | 0.18 |
| RATED FLOW | 90 L/min | RATED HEAD | 4.0m |
| MAXIMUM FLOW | 155 L/min | MAXIMUM HEAD | 7.0m |
| SOFT SOLIDS | 15mm | CABLE LENGTH | 10m |
| OUTLET | 32m | WEIGHT | 8.5kg |
| SIZE LxWxH (mm) | 220 x 120 x 340 |
WHOLE HOUSE WATER FILTER SYSTEM SERVICE KIT FOR (NCWHWPTUV)
In stock
$325.00SERVICE KITÂ Â (NCWHWPTUV)
INCLUDES
1 x 20” x 4.5” 5 micron poly spun sediment filter
1 x 20” x 4.5” 5 micron carbon block
1 x Quartz thimble
1 x 48w uv lamp
1 x o-ring
whole house water filter High performance single water filter 20 inch x 4.5 inch (taste and oder )
In stock
$320.00What’s In The Box?
20″ x 4.5″ Single Sediment & Carbon Filter System (taste and odour )
- 1 x Premium 20″ x 4.5″ Filter Housing
- 1 x Pressure Gauge
- 1 x 1/4″ Pressure Gauge Hole Plug
- 1 x 5 Micron Silver-Impregnated Carbon Block Filter Cartridge
- 1 x Heavy-Duty Stainless Steel Mounting Bracket
- 1 x Housing Opening Spanner
- Installation & Operating Instructions
Features
✔ Removes sediment, dirt, rust, taste and odour
✔ Silver-impregnated carbon block helps inhibit bacterial growth within the cartridge media
✔ Large 20″ x 4.5″ housing for high flow and longer cartridge life
✔ Ideal for rainwater, tank water and whole-house pre-filtration applications
Replacement filter cartridges available from:
www.northcoastwatertanks.com.auÂ
“We proudly deliver our poly round rainwater tanks across Northern nsw, Mid North Coast, Northern Rivers, Coffs Harbour, Ballina, Lismore, Tweed Heads, Byron Bay, and South East Queensland. and surrounding areas—bringing quality water storage right to your property.
water filters lismore  water filters northern rivers  water filters coffs harbour  water filters mid north coast  water filters south east queensland
whole house water filter Undersink water filter kit – 10” x 2.5 ”twin under sink (ncust1025)
In stock
$320.00whole house water filter Twin Stage Whole House Water Filter System – 10″ x 2.5″ (ncust1025)
Improve the quality of your household water with this high-performance Twin Stage Whole House Water Filter System. Designed for town water and rainwater applications, this system helps reduce chlorine, chloramine, sediment, unpleasant tastes and odours while providing cleaner water throughout your home.
Ideal for protecting taps, showers, hot water systems and household appliances, this DIY-friendly filtration system includes quality components for reliable long-term performance.
What’s Included
- 2 x 10″ x 2.5″ Filter Housings
- Dual Mounting Bracket
- Designer Chrome Filter Tap
- Isolation Tap
- PVC Piping
- Quick Connect Fittings
- filter spanner
- 1 x 5 micron poly spun sediment filter ncusps1025
- 1 x 1 micron Carbon Block filter       ncuscb1025
replacement parts and filters at north coast water tanks Â
Key Benefits
- Reduces chlorine and chloramine from mains water
- Improves water taste and odour
- Helps protect household appliances and plumbing fixtures
- Low pressure drop design maintains strong water flow
- DIY installation with quality fittings included
- Suitable for homes, small businesses and rural properties
Applications
- Whole house water filtration
- Town water supplies
- Rainwater tank systems
- Rural and residential properties
Enjoy cleaner, better tasting water throughout your home with this reliable and cost-effective twin stage filtration system.
email  info@northcoastwatertanks.com.au
phone 0407002833